Vinit Stainless provides a wide range of stainless steel 410 fasteners, fabricated and supplied from our modern facility in Chennai, India. Composed for durability, abrasion resistance, and limited corrosion protection, 410-grade fasteners are suitable for a broad range of mechanical and structural applications. As an ISO-certified manufacturer, we guarantee every product meets the highest levels of quality and performance. Our stainless steel 410 fasteners find extensive use in general engineering, automotive, and building industries. With Vinit Stainless, customers not just get top–class fasteners but also unwavering technical assistance and timely delivery.
410 stainless steel fasteners are martensitic in composition and have around 11.5–13.5% chromium and up to 0.15% carbon. The typical tensile strength of these fasteners varies from 480 to 700 MPa, with favorable wear resistance. Although corrosion resistance is reduced relative to austenitic grades, 410 bolts are satisfactory for mildly corrosive conditions. They are magnetic, relatively machinable, and should not be welded. Mechanical strength and low cost render them useful for structural work in mildly aggressive conditions.
| Specifications | ASTM A193 / A193, ASME SA193 / SA194 |
| Standard | DIN, ASTM, BS and all International Standards |
| Length | 3 mm to 200 mm |
| Nuts Size | M3 To M56 3/6″ to 2″ |
| Bolt / Screw Size | M3 To M56 3/6″ to 2″ |
| Machine Screws Size | M1.6 To M12 |
| Washers Size | M3 To M56 3/6″ to 2″ |
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 410 | 0.15 | 1.00 | 1.00 | 0.040 | 0.030 | 13.5 – 11.5 | – | 0.75 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| – | – | 480 min | 275 min | 16 min |
Contact us to get a quick quote for your requirement.
Stainless Steel 410 Nuts are available in sizes ranging from M3 to M64 and offer excellent strength and corrosion resistance. They are used in various applications, including automotive and industrial machinery.
Stainless Steel 410 Stud Bolts, available in sizes from 1/4″ to 2″ diameter, are known for their high tensile strength and corrosion resistance. These bolts are commonly used in high-stress environments like power plants and chemical industries.
Stainless Steel 410 Bolts come in dimensions ranging from M6 to M56. They provide superior corrosion resistance and durability, making them ideal for applications in marine and industrial environments.
Stainless Steel 410 threaded rods are available in sizes from 1/4″ to 1-1/2″ in diameter and up to 12 feet long. These rods offer high strength and corrosion resistance and are suitable for construction and engineering projects.
Stainless Steel 410 screws, sized from 2 to 3/4″ in diameter and up to 6 inches in length, provide excellent corrosion resistance and strength. They are used in various applications, including machinery and structural components.
Stainless Steel 410 washers are available in sizes from M3 to M64. These washers offer superior corrosion resistance and are used to distribute the load of bolts and screws evenly in various industrial applications.
Stainless steel 410 bolts are widely used in automotive components, construction fastenings, and general engineering applications. They are suitable for gears, shafts, bolts, and fasteners for use in dry or mildly corrosive situations due to their high wear resistance and strength. 410 fasteners also occur in pipelines, industrial furnaces, and mechanical components where hardness is the requirement. They are employed in oil refineries and power plants for use in components subject to moderate pressure and heat. Their resilience, simplicity in manufacturing, and affordability are responsible for their extensive applications within commercial and industrial hardware systems
©2024 Vinit Stainless All Rights Reserved.
